|
Classic Army M15 Special Forces Crane Stock (A101P)
|
|
Classic Army M15 Butt Stock w/ Wiring (A056P)
|
|
Classic Army High Torque Long Motor (P025M)
|
Our Price: $87.99
(Out of Stock)
|
|
|
Our Price: $47.99
In Stock
|
|
|
Our Price: $44.00
(Out of Stock)
|
|
|
|
|
|
|
Retractable Crane stock for Classic Army M15 variants. This stock will allow you to hold a large battery and keep the ability to retract the stock. (A101P)
|
|
High torque motor for MP5/G3/M4 series
|
|
|
NcStar AR-15 Detachable Carry Handle (MARDCH)
|
|
Classic Army High Torque Short Motor (P082M)
|
|
Classic Army G36 Hop Up Chamber (P157P)
|
Our Price: $35.99
In Stock
|
|
|
Our Price: $32.99
(Out of Stock)
|
|
|
Our Price: $30.00
(Out of Stock)
|
|
|
|
|
|
|
For the ultimate back to the basics and durable detachable AR-15 carry handle, the NcSTAR MARDCH detachable carry handle is the high quality detachable AR-15 carry handle you’ve been looking for at a great price.
|
High torque motor for AK/AUG/Thompson series
|
Replacement hop up chamber for G36 series
|
|
|
Classic Army 6mm Metal Bushing V2 Gear Box (A001M)
|
|
NcStar AR-15 Detachable Rear Sight (MARDRS)
|
|
NcStar AR-15 Flip-Up Front Sight (MARFLF)
|
Our Price: $29.99
In Stock
|
|
|
Our Price: $29.00
(Out of Stock)
|
|
|
Our Price: $26.99
(Out of Stock)
|
|
|
|
|
|
|
Classic Army 6mm Metal Bushing Gear Box For Version II
|
For solid and dependable back-up fixed A2 rear sight, the NcSTAR MARDRS does not take up much of your valuable Picatinny rail space. You can have a back-up iron sight ready to go at a moment’s notice and have space for a red-dot/ reflex/ holographic optic on your AR-15 upper receiver.
|
For a durable and compact flip-up front A2 iron sight the NcSTAR MARFLF is the AR-15 back-up front iron sight that should equip your AR-15 rifle.
|
|
|
Echo 1 AK47 Hop Up Unit
|
|
Tokyo Marui Piston Assembly
|
|
Classic Army 7mm Bearing Set (P053M)
|
Our Price: $20.00
(Out of Stock)
|
|
|
Our Price: $18.00
In Stock
|
|
|
Our Price: $16.99
In Stock
|
|
|
|
|
|
|
Echo 1 AK47 Hop Up Unit
|
|
Reduce friction in your gearbox with these high quality Classic Army 7mm bearings.
|
|
|
Element G16 Motorgrip (ELE-MG-G16)
|
|
King Arms Air Seal Chamber (KA-PA-10)
|
|
Classic Army Bevel Gear (P212M)
|
|
|
Our Price: $15.50
(Out of Stock)
|
|
|
Our Price: $14.00
In Stock
|
|
|
|
|
|
|
Want a distinctly different pistol grip for your M16 or M4 variant? Have one of the many AEGs or sniper rifles out there that uses M16 pistol grips, but just don't like the same old look? Try the new Element G16 motor grip, with contoured finger grooves, slight palm swell for a better feeling grip and high rise webguard for a more uniform fit to your hand. Available in 3 colors (black, OD green and tan) to fit in with your other furnature, this is a distinct and affordable way to change the look of any AR variant. Brass sockets for mounting the heatsink/motor cover, and fine threaded screws to mount the motor cover on, but uses your old motor cover to keep costs low.
|
If your hop up isn't adjusting the way it used to, your hop up bucking is probably worn out. These new hop up buckings from King Arms replace the stock bucking in Tokyo Marui and compatible pistols and rifles. NOT COMPATIBLE WITH AEGs.
|
|
|
|
Classic Army Spur Gear (P211M)
|
|
Classic Army Sector Gear (P210M)
|
|
Classic Army 7mm Oily Steel Bushing Set (P058)
|
Our Price: $14.00
In Stock
|
|
|
Our Price: $14.00
In Stock
|
|
|
Our Price: $12.99
(Out of Stock)
|
|
|
|
|
|
|
|
|
Upgrade those nylon bushings in your stock gearbox with these high quality Classic Army 7mm bushings.
|
|
|
Classic Army MP5 SD Hand Guard Pins (P018M)
|
|
Classic Army M15 Selector Plate (P087P)
|
|
Element Silicon Hop-Up Bucking (65 Hard)
|
Our Price: $9.00
In Stock
|
|
|
Our Price: $9.00
In Stock
|
|
|
Our Price: $8.99
(Out of Stock)
|
|
|
|
|
|
|
Classic Army MP5 Low Profile Rail Mount Fits most MP5 and G3 Style Guns
|
Classic Army Selector Plate for M15-style replicas. This selector plate is for both 6mm and 7mm gear boxes.
|
If your hop up isn't adjusting the way it used to, your hop up bucking is probably worn out. These new hop up buckings from Element offer more accurate hop up adjustment through a range of 3 different hardness levels of silicone content, to help improve shooting accuracy, air seal and reliability. These are compatible with most models of AEG (not compatible with AEPs), but installation may require experience, so consult a airsoft technician before attempting.
|
|
|
Element Silicon Hop-Up Bucking (55 Hard)
|
|
Element Silicon Hop-Up Bucking (45 Hard)
|
|
Classic Army Crane Stock Knobs (P117P)
|
Our Price: $8.99
(Out of Stock)
|
|
|
Our Price: $8.99
(Out of Stock)
|
|
|
Our Price: $8.99
In Stock
|
|
|
|
|
|
|
If your hop up isn't adjusting the way it used to, your hop up bucking is probably worn out. These new hop up buckings from Element offer more accurate hop up adjustment through a range of 3 different hardness levels of silicone content, to help improve shooting accuracy, air seal and reliability. These are compatible with most models of AEG (not compatible with AEPs), but installation may require experience, so consult a airsoft technician before attempting.
|
If your hop up isn't adjusting the way it used to, your hop up bucking is probably worn out. These new hop up buckings from Element offer more accurate hop up adjustment through a range of 3 different hardness levels of silicone content, to help improve shooting accuracy, air seal and reliability. These are compatible with most models of AEG (not compatible with AEPs), but installation may require experience, so consult a airsoft technician before attempting.
|
Replacement knobs for CA Crane stock.
|
|
|
Modify Spring Set (GB-05-02)
|
|
Classic Army Safety Switch for M15 series (P099P)
|
|
|
Our Price: $7.00
(Out of Stock)
|
|
|
Our Price: $5.99
In Stock
|
|
|
|
|
|
Modify Spring Set (GB-05-02) for Ver.2/Ver.3 Gearbox. Includes: Anti-reverse Latch Spring, Safety Catch Spring, Ver.2 Cut Off Lever Spring, Ver.3 Cut Off Lever Spring, Switch Spring, Tappet Spring, 3 Screws
|
|
|