Military & Law Enforcement

LIABILTY WAIVER

EMAIL US

HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Join our mailing list!







(Your shopping cart is empty)
You are here: Home > New Products
We found 28 results matching your criteria.
The latest products available at Precision Airsoft!
Sort By:
1
Precision Combat Technologies Gas Blow Back Magazine Saver Tenergy Lipo Alarm - Low Power Indicator SHS 8mm Bearing Bushings
Our Price: $5.99
IN STOCK!
Our Price: $9.99
IN STOCK!
Usually Ships in 1 to 2 Days
Our Price: $11.99
IN STOCK!
Precision Combat Technologies Gas Blow-Back Magazine Saver Tenergy Lipo Alarm  - Low Power Indicator SHS 8mm Bearing Bushings
A discovery by our very own Gun Guy, the new Precision Combat Technologies Gas Blow-Back Magazine Saver is a bi-chemical compound that re-hydrates your rubber seals, extending the life of gas magazine seals, revitalizing old gas guns to like new performance! Tenergy Lipo Alarm - Low Power Indicator plugs into your Li-Po battery's charging port and indicates low voltage with flashing LED's and audible alarm when voltage drops below 3V helping to save your Li-Po packs from over-drain damage. Just plug alarm into battery then place your battery into gun like normal - pull battery off gun when lights or alarm sound. This is a long awaited device and a must have for all Li-Po pack owners! SHS 8mm Bearing Bushings  High quality, ball bearing bushings for use in AEG gearboxes. Use them for your next rebuild, lower the friction in yoru gearbox and increase it's efficiency; lower friction, higher cyclic rate, longer battery life!
SHS M14 Aluminum Nozzle with O-Ring SHS 7mm Bearing Bushings SHS "O" Type Pinion Gear
Usually Ships in 1 to 2 Days
Our Price: $8.99
IN STOCK!
Usually Ships in 1 to 2 Days
Our Price: $11.99
IN STOCK!
Usually Ships in 1 to 2 Days
Our Price: $6.99
IN STOCK!
SHS M14 Aluminum Nozzle with O-Ring SHS 7mm Bearing Bushings SHS "O" Type Pinion Gear
SHS M14 Aluminum Nozzle with O-Ring  Version 7/M14 gearbox Cylinder Nozzle with an O-ring for better air seal, made out of aluminum and CNC machined for highest quality and tolerance, fits most manufacturer cylinder heads and good years of abuse!
SHS 7mm Bearing Bushings  High quality, ball bearing bushings for use in AEG gearboxes. Use them for your next rebuild, lower the friction in yoru gearbox and increase it's efficiency; lower friction, higher cyclic rate, longer battery life!
SHS "O" Type Pinion Gear  Finally, some easily identified options in the Pinion Gear market! The "O" type pinion gear is for use with motors that are set with a round shaft, so a pinion puller tool may be needed to change them out. Great for use with most bevel gears, but remember to set your depth or you will cause damage to either the pinion gear or the bevel gear!
SHS Standard Short Motor SHS High Speed Long Motor Magpul MOE Carbine Stock (Olive Drab)
Usually Ships in 1 to 2 Days
Our Price: $19.99
IN STOCK!
Usually Ships in 1 to 2 Days
Our Price: $45.99
IN STOCK!
Our Price: $59.99
IN STOCK!
SHS Standard Short Motor SHS High Speed Long Motor Magpul MOE Carbine Stock (Olive Drab)
SHS Standard Short Motor  Tired of high priced stock replacement motors? Want a inexpensive motor that doesn't wear out in a few games or lowers your performance? Here is your answer! These motors work as a stock replacement type, but will have a higher rpm and torque generating quality then most stock motors on the market, making them a great choice for people building 400fps gearboxes that don't sound like chainsaws! Use with any spring rated up to M120, but recommend either torque gears or torque motors for springs of tensions greater then 120 meters per second. Short shaft model for AK47/74s, AUG, G36 and M14 variants.
SHS High Speed Long Motor  So, your playing an airsoft game and hear something that sounds suspiciously like a chainsaw, but instead of saw dust, you get hit by a hail of BBs like a midwest hail storm! Ever wonder how those guys do that? Wonder no more! Combine with a set of high speed gears and you can turn the tides on those guys with the BB hosing AEGs, but remember, use a sector clip with your build if the sector gear doesn't already have one! Use with any spring rated up to M120, but recommend either torque gears or torque motors for springs of tensions greater then 120 meters per second. Long shaft model for M4/M16, G3, MP5 and P90 variants.
Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality. The Magpul MOE Stock Mil-Spec Model is a drop-in replacement butt-stock for carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure and maintains strength by resisting spring relaxation. The Mil-Spec Model includes a standard 0.30" rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear. Compatible with most AR style AEGs including KWA, Echo 1, and Classic Army.
BlackHawk SERPA Sportster Glock 19/23 Left-Handed (Gray) BlackHawk SERPA Sportster Glock 26/27 Right-Handed (Gray) BlackHawk SERPA Sportster Beretta 92 Right-Handed (Gray)
Our Price: $28.99
IN STOCK!
Our Price: $28.99
IN STOCK!
Our Price: $28.99
IN STOCK!
BlackHawk SERPA Sportster Glock 19/23 Left-Handed (Gray) BlackHawk SERPA Sportster Glock 26/27 Right-Handed (Gray) BlackHawk SERPA Sportster Beretta 92 Right-Handed (Gray)
SERPA Sportster (gun metal gray holster body with black SERPA mechanism)
 
Developed for civilian concealed carry and range use, but still has great patented SERPA design.
Traditional polymer material construction found in other injection molded holsters.
Comes with paddle mount only.
Paddle and traditional polymer for civilian use.
 
For high threat level environment, use the Original SERPA!
This SERPA holster comes with the paddle only (no belt loop attachment)
SERPA Sportster (gun metal gray holster body with black SERPA mechanism)
 
Developed for civilian concealed carry and range use, but still has great patented SERPA design.
Traditional polymer material construction found in other injection molded holsters.
Comes with paddle mount only.
Paddle and traditional polymer for civilian use.
 
For high threat level environment, use the Original SERPA!
This SERPA holster comes with the paddle only (no belt loop attachment)
SERPA Sportster (gun metal gray holster body with black SERPA mechanism)
 
Developed for civilian concealed carry and range use, but still has great patented SERPA design.
Traditional polymer material construction found in other injection molded holsters.
Comes with paddle mount only.
Paddle and traditional polymer for civilian use.
 
For high threat level environment, use the Original SERPA!
This SERPA holster comes with the paddle only (no belt loop attachment)

Will NOT fit Brigadier, Elite, or M9A1 (Railed).
BlackHawk SERPA Sportster Glock 19/23 Right-Handed (Gray) SHS CA36 Aluminum Nozzle with O-Ring SHS BT5 Aluminum Nozzle with O-Ring
Our Price: $28.99
IN STOCK!
Usually Ships in 1 to 2 Days
Our Price: $8.99
IN STOCK!
Our Price: $8.99
IN STOCK!
BlackHawk SERPA Sportster Glock 19/23 Right-Handed (Gray) SHS G36 Aluminum Nozzle with O-Ring SHS BT5 Aluminum Nozzle with O-Ring
SERPA Sportster (gun metal gray holster body with black SERPA mechanism)
 
Developed for civilian concealed carry and range use, but still has great patented SERPA design.
Traditional polymer material construction found in other injection molded holsters.
Comes with paddle mount only.
Paddle and traditional polymer for civilian use.
 
For high threat level environment, use the Original SERPA!
This SERPA holster comes with the paddle only (no belt loop attachment)
SHS G36 Aluminum Nozzle with O-Ring Version 3/G36 gearbox Cylinder Nozzle with an O-ring for better air seal, made out of aluminum and CNC machined for highest quality and tolerance, fits most manufacturer cylinder heads and good years of abuse!
SHS MP5 Aluminum Nozzle with O-Ring  Version 2/MP5 gearbox Cylinder Nozzle with an O-ring for better air seal, made out of aluminum and CNC machined for highest quality and tolerance, fits most manufacturer cylinder heads and good years of abuse!
SHS AK Aluminum Nozzle with O-Ring SHS 13:1 High Speed Gear Set SHS 16:1 High Speed Gear Set
Our Price: $8.99
IN STOCK!
Usually Ships in 1 to 2 Days
Our Price: $29.99
IN STOCK!
Usually Ships in 1 to 2 Days
Our Price: $29.99
IN STOCK!
SHS AK Aluminum Nozzle with O-Ring SHS 13:1 High Speed Gear Set SHS 16:1 High Speed Gear Set
SHS AK Aluminum Nozzle with O-Ring  Version 2/M4 gearbox Cylinder Nozzle with an O-ring for better air seal, made out of aluminum and CNC machined for highest quality and tolerance, fits most manufacturer cylinder heads and good years of abuse!Most stock AEG air nozzles don't reach the max air compression achievable. This is because they don't have an O-ring. The O-ring these SHS air nozzles come with allow you to reduce air leakage and can possibly fix a gun with very little compression. A high quality SHS air nozzle is one more way to pull all of the performance out of your AEG possible.
SHS 13:1 Flat High Speed Gear Set  High quality, non-helical, CNC machined steel high speed gear set for use in Version 2, 3 and 6 gearboxes. For use with M90-M120 springs. Recommend the use of a sector clip with all high speed builds for more reliable feeding!
SHS 16:1 Flat High Speed Gear Set  High quality, non-helical, CNC machined steel high speed gear set for use in Version 2, 3 and 6 gearboxes. For use with M90-M120 springs. Recommend the use of a sector clip with all high speed builds for more reliable feeding!
G&G Combat Machine AK47 - Imitation Wood G&G RK104 EVO AK74 G&G GR16 Femme Fatale
Our Price: $156.00
IN STOCK!
Our Price: $265.00
IN STOCK!
Our Price: $149.99
(Out of Stock)
G&G Combat Machine AK47 - Fake Wood G&G RK104 EVO AK74 G&G GR16 Femme Fatale
G&G Combat Machine AK47 -Fake Wood
G&G has done it again, coming up with one of the best AK47 AEG's under $200. The body is made of a strong fiber reinforced, nylon based polymer, not cheap plastic. This Combat Machine AK47, has a metal gas tube, outer barrel, sights, and magazine. With a new design Version 3 gearbox that has nearly every upgrade part you would want in a AEG costing two to three times as much! Unlike some of the other companies attempt to make a low cost version of their metal rifle G&G has hit one out of the park with the Combat Machine series of AEG!
G&G RK104 EVO features top level build quality and finish. If your looking for a premium AK type the RK 104 should be considered. Features an AK74U style gas system with a rail integrated hand guard as well as ERGO pistol grip. Performance is a very consistent 360 FPS with .20g. from its 8mm bearing gearbox. This is by far one of the best AEG's we have seen under $200. The body is made of a strong Polymer, not cheap plastic. It is a basic M4, has a metal buffer tube, outer barrel, and sights. It has a newly redesigned gearbox that works phenomenally. The other nice thing about the rifle is the feeling you get holding it. This definitely feels like a nicer gun than any other gun with a matching price. Unlike some of the other companies attempt to make a low cost version of their metal rifle G&G has hit one out of the park with the Combat Machine GR16.

This Special Edition Femme Fatale version features pink polycarbonate parts and a purple anodizing to its metal components. It also features a crane stock for added comfort. This is a great buy for the feminine player on your team or the girly girl you are trying to get to play.
MAG 170rnd P90 Mid-Capacity Magazine BlackHawk SERPA Sportster SIG 220/226 Right-Handed (Gray) Action 80mm mock suppressor/barrel extension, 14mm CCW thread (OD)
Our Price: $19.99
(Out of Stock)
Our Price: $28.99
(Out of Stock)
Our Price: $19.99
(Out of Stock)
MAG 170rnd P90 Mid-Capacity Magazine BlackHawk SERPA Sportster SIG 220/226 Right-Handed (Gray) Action 80mm mock suppressor/barrel extension, 14mm CCW thread (OD)
Another great midcap magazine from MAG! These 170rnd magazines will work in all P90 model AEGs. When you first pickup the mag you will feel the quality. These magazines have a very durable design and do not feel cheap or substandard in anyway. A great step for P90 users who are tired of HiCap mags.
SERPA Sportster (gun metal gray holster body with black SERPA mechanism)
 
Developed for civilian concealed carry and range use, but still has great patented SERPA design.
Traditional polymer material construction found in other injection molded holsters.
Comes with paddle mount only.
Paddle and traditional polymer for civilian use.
 
For high threat level environment, use the Original SERPA!
This SERPA holster comes with the paddle only (no belt loop attachment)
Action 80mm mock suppressor/barrel extension, 14mm CCW thread (OD)
Action 80mm mock suppressor/barrel extension, 14mm CCW thread (Tan) SHS V.7/M14 Gear Set SHS Standard Ratio Flat Gear Set
Our Price: $19.99
(Out of Stock)
Usually Ships in 1 to 2 Days
Our Price: $29.99
(Out of Stock)
Our Price: $15.99
(Out of Stock)
Action 80mm mock suppressor/barrel extension, 14mm CCW thread (Tan) SHS V.7/M14 Gear Set SHS Standard Ratio Flat Gear Set
Action 80mm mock suppressor/barrel extension, 14mm CCW thread (Tan) SHS Version 7/M14 Gear Set  High quality,CNC machined steel gear set for use in TM style M14/Version 7 gearboxes (with reduced diameter spur gear). Use stronger springs, increase your muzzle velocity and then dominate the competition! Recommend using SHS Short High Torque Motor with these for best results!
SHS Standard Ratio Flat Gear Set  High quality,CNC machined steel gear set for use in Version 2, 3 and 6 gearboxes. Each set comes with a sector gear, spur gear and bevel gear, as well as pinion gear, anti reversal latch and release tooth for a standard piston body (piston not included). A Gun Guy pick for you "DIY" airsoft gunsmiths, saves a lot of guess work and even has an enlarged tappet engagement for better feeding!
SHS 100:200 Helical High Torque Gear Set
Usually Ships in 1 to 2 Days
Our Price: $29.99
(Out of Stock)
SHS 100:200 Helical High Torque Gear Set
SHS 100:200 Helical High Torque Gear Set  High quality,CNC machined steel gear set for use in Version 2, 3 and 6 gearboxes. Helical gears have the teeth cut at an angle, providing a larger surface area for gear engagement and a lot more strength, but are more difficult to install due to the greater care done in shimming them. For use with M130-M150 springs.
   
 
1
Precision Combat Arms
1710 E Trent Ave #1 Spokane, WA 99202
 About Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © 2004 Precision Airsoft, LLC. All Rights Reserved.
Built with Volusion